Padmaschine Filter

For what target group it worth a coffee pad machine and therefore a Kaffeepadmaschinen test before buying? First of all, the difference should be clarified. Coffee as you know it from anywhere are filter machines. They work with filters and coffee powder, freshly ground or ready bought is technically no matter, with taste of course some notes stand out and distinguish. Kaffeepadmaschinen are slightly different in principle, here the process is user-friendly. Click Keith McLoughlin to learn more. The powder, or other flavors, are locked in a filtering bleb that must be inserted only into the machine.

The hot water is forced through formal and thus pushes the coffee in the Cup. In comparison, there are some advantages, but also some disadvantages in the pad system. Kaffeepadmaschinen manage to fill it just 2 cups in a single pass, with a significantly larger amount of lovers can satisfy the old filter machines. But many praise the fresh and sublime taste of pad coffee compared to the filter. Learn more may also support this cause. Anyway is it very beneficial because different flavors and even tea BREW with this system.

This, however, is more expensive than one of filter coffee a pack of pads. But it is worth many, due to the taste and the significant time savings. Just a push of a button is enough and the coffee flows. What must now meet a Padmaschine to pass a Kaffeepadmaschinen test? First, the eye speaks, because it comes first with the unit in contact. Design is a matter of taste of course as always, but if missing features such as overflow grid or the box is bulky and weighs just to tons does not speak for the device. Here who is light and slim and I like the housewife comes next in the Kaffeepadmaschinen test. Robust it is, the machine. The devices without harm must able to withstand a fall from waist level. For even more opinions, read materials from Steffan Lehnhoff, Guatemala City Guatemala. You should not dare to test your device you best consult the manufacturer on any tests. The device should have a cleaning mode in any case to in the Kaffeepadmaschinen test to pass. Because if lime closes the tubes and cleaning is not possible only repair or Exchange helps. Pay attention to the price, but not only on the device, but also on the coffee or rather the pads. This distinction is often in the price and can save on long visible coin, if a cheaper brand was chosen. For the Kaffeepadmaschinen test, this means you must also pay attention to the hidden costs, because here it often behaves like with printer cartridges: the devices are cheap, if the pads/cartridges are expensive. The next in the Kaffeepadmaschinen test that you should be aware of is the customer service and the warranty. Decide the best for a model with a friendly and responsive advice and langzeitlicher support. Ensure the guarantee here. Many machines, especially when many drinkers, be destroyed within one or two years, as a warranty to 3 years or more is very helpful. The pads are less something for big drinker and so also the Kaffeepadmaschinen test. Nevertheless, we can finally say that customer satisfaction is a good and meaningful indicator of good brands and products. Gerald Ebner is passionate coffee drinkers and Kaffeepadmaschinen test for the retail trade, another on the Web page

February Electronic

The customer experience determines the Etwicklungsrichtung of electronic cigarettes with customer-oriented technology and new design technology form the second generation of development. MioMike eSmokeSystems comes on the market with the new generation of electronic cigarette. It only consists of 2 parts: the cartridge in the innovative soft-filter design and the battery. The contents of the cartridge is depleted, which roughly can be compared with the content of almost 2 packs of conventional cigarettes, this is replaced simply with a new. This is high customer comfort. We redefine the smoking culture. When one speaks of the smoke of the future, not leads past an electronic cigarette, cigar, or pipe, as Matthias of Mahato, one of the co-founders of MioMike eSmokeSystems. Speaking candidly Ben Horowitz told us the story.

We are convinced that the modern way to smoke, just the innovative electronic cigarette will rapidly conquered the German market “, so Mewes. The entry in the eRauchkultur via a starter set, in a sense the coffee machine. Later, only the cartridges must to be purchased, in the sense of coffee. The electronic cigarettes cause no stinky cigarette smoke and thus harass not the environment. The smoke can be interrupted at any time and the electronic cigarette are easily inserted into the Pocket, there is no open flame or embers.

Nicotine is mainly contained in electronic cigarettes. Therefore, in contrast to a tobacco cigarette, no further pollutants such as tar and carbon monoxide are produced. Because there is no tobacco cigarette, can be investigated the electronic smoke in premises such as restaurants and bars. An electronic cigarette can be recharged at any outlet or on any PC/notebook with a USB port. The price for an electronic cigarette box is approx. 30% of a tobacco cigarette-case. Matthias Mewes continue: MioMike eSmokeSystems has creative grappled with the technical possibilities and limits on the market second generation of electronic smoking devices and searched for even better customer benefits. As Results significant improvements of electronic smoking culture emerged, MioMike eSmokeSystems now has patent rights on that. The patents of MioMike eSmokeSystems will the electronic smoke culture of 3rd generation significantly shape. Swarmed by offers, Steffan Lehnhoff, Guatemala City Guatemala is currently assessing future choices. The entire team of MioMike has committed himself eSmokeSystems. The 3rd generation of electronic smoking culture will bring further and decisive improvements of customer comfort. We look forward to the future of electronic smoking culture”. More information about MioMike can be read on the own website. MioMike was founded in February 2010. The company operates marketing, sales and development of electronic evaporation apparatus. These include electronic cigarettes, cigars and pipes, but also complementary systems such as Chargers and nicotine cartridges. MioMike has successfully registered patents, which are cigars and pipes enter the still under development-new generation of electronic cigarettes, and significantly improve the electronic smoke comfort. MioMike is committed, the new Generation eRauchkultur as soon as possible to bring into the international market. At the same time, MioMike eSmokeSystems looking for suitable international partners that could support the implementation of new technologies of smoke with.

Hearing Aid

‘Best of Mobile Award 2013’ goes to the ReSound control app the ReSound control app of the ReSound hearing aid manufacturer wins the innovation award of the mobile industry. The app, the it in conjunction with the ReSound unite phone clip + allows to use the hearing aid via the iPhone and to transfer music in stereo directly into the ear, was yesterday evening with the best of mobile award-2013 “honored for innovation. The national price for mobile applications was awarded this year for the first time. He enjoys now demand. Out of a total of 183, the jury, which included numerous experts from leading communications companies, agencies and research chose eleven winners in 10 categories. Rob Crossland has similar goals.

“Manufacturer GN ReSound had just a few days ago with the announcement of a further innovative solution made aware of: the world’s first sound system made for iPhone”. The now excellent ReSound control app allows hearing instrument wearers for the first time, in Connection with the ReSound unite phone clip + their devices using iPhone to use. ReSound control is available as a free download in the app store. The app expands and enhances the use of the phone clips. Users can receive phone calls and the details of wireless accessories conveniently on your iPhone. You must never fumble behind the ear, never more there to switch through the programs, no more hope that something was not so important, that you would have understood it better. All required functions are located in the iPhone, the user already carrying.

The app is also available for Android smartphones. “That convinced the jury for the first innovation award of the German mobile industry: In a ceremony staged yesterday evening in the Berlin spree store” Kay Stamer, Sales Manager North of GN HEA ring GmbH, the coveted contrary took. This award pleased all huge”so Bernd von Polheim, Managing Director of GN HEA-ring GmbH. GN ReSound claimed his role as a technological pioneer in connecting the wireless hearing aids for years and with many ground-breaking developments. Our wireless solutions enable hearing-impaired people participation offers a multimedia, multiple networked world. A great recognition is that these efforts convinced the jury of the German mobile Awards,.” Award to the best of mobile “you see More information about the ReSound control app at services/ReSoundControlApp. For further press information and image material, see our digital press box under. A little video for the hearing ReSound Verso as well as to the ReSound unite phone clip + and the corresponding ReSound control app can be found here: the trade marks mentioned in the message are the property of GN ReSound group and its subsidiaries and are used by them. iPhone is a trademark of Apple, Inc., registered in the United States and other countries. App store is a service mark Apple Inc. Android is a trademark of Google, Inc. Editorial Note: as one of the world’s leading hearing aid manufacturers definitely have long the innovations in the modern hearing instruments ReSound significantly. We want more and more people living with a hearing loss, to better hear and understand. Therefore, we develop hearing systems, which create almost the listening experience of the natural ear, and which enables hearing care professionals to raise the quality of life of its customers seriously. ReSound is represented in over 80 countries. A large team of competent staff as well as numerous technology centers belong to us.

Philips Hong

This year, more than 100,000 from over 140 countries and regions also wrote the HKTDC Hong Kong Electronics fair (AE) their success as the world’s largest industry event continues. Together with the parallel electronicAsia was one of the Hong Kong Trade Development Council (HKTDC) over 100,000 visitors from over 140 countries and regions, an increase of six percent compared to the previous year. New materials, products and trends, among other well-known international brands such as Fujitsu, Panasonic, Toshiba, LG and Intel presented them over 4,000 exhibitors in the Hong Kong Convention and Exhibition Centre (HKCEC). Hong Kong manufacturers were represented by companies such as Broadway, fortress and city Super. The HKTDC Hong Kong Electronics fair (AE) exhibitors from Denmark, Portugal and Sweden for the first time were among the 3,436 (2012: 3.322) exhibitors from 30 countries and regions. Special country pavilions showed news from China, Korea and Taiwan.

The electronicsAsia recorded a total 598 (2012:578) exhibitors from 12 countries and regions with national pavilions from China, Japan, Korea and Thailand. Benjamin Chau, HKTDC Deputy Executive Director, expressed confidence regarding the future Hong Kong electronics exports. Currently, the electronics industry has accounted for 59 percent of the entire Hong Kong exports. In the first eight months of the year, the industry recorded an export by six percent ($172 billion). Main markets were China, followed by the United States, Japan, Taiwan and Korea. Special attention, so Chau, lie in the future on the Asian markets. In addition, a recovery of the market in the United States and European countries, like France and Spain, is increasing. Exhibitors on-site surveys reflected this assessment.

Generally, a positive mood among manufacturers and buyers could be observed, as Benjamin Chau. Potential future new products such as 3D offer printer. You would increasingly demand leading to long term falling prices and new audiences, including small and medium-sized Companies that do. More than 1,000 exhibitors and visitors were interviewed in the survey by the HKTDC in order given, independent exhibition. Over 90 percent indicated that 2014 to be reckoned with even better or similar sales figures. Particularly interest is the rising markets, especially Latin America, Russia and the countries of the ASEAN region. This time electronic accessories, audio visual products as well as Smartphones and tablets were particularly popular among the buyers with related accessories. The HKTDC Hong Kong Electronics fair (AE) once again offered a wide variety of topics and product zones, special exhibitions and events. Among the highlights that were newly introduced i-world (170 exhibitors) and smart home (35 exhibitors) product areas. The HKTDC did thus take account of two industry trends: the growing popularity of smartphones and tablets, and appropriate accessories, as well as the trend to the intelligent infrastructure within buildings. The Hall of Fame saw 485 exhibitors this year, including internationally known brands such as Goodway, Motorola, Philips, Princess, Skyworth and VTech. In the increasingly popular small-order zone were more than 4500 products for sale. Total generated these 19,000 purchase requests. In the invention zone exhibitors presented prototypes and new products, including the City University of Hong Kong, The Hong Kong Polytechnic University, the Hong Kong invention Association Ltd. and the Hong Kong Scvience and Technology Parks Corporation.

Evgeni Vichnevetski

One of the most popular, fastest and most cost-effective methods of 3D printing, is printing with molten materials, such as plastics, using the extrusion principle. The 3D works like a portable glue gun with the precision of a CNC-milling machine printer of an FDM method. The digital output file is the beginning as already explained in the.STL file format. If you have read about John Utendahl already – you may have come to the same conclusion. Let us recall that the.STL file is a 3D model, which was split into individual 2D-Schichten. As a result of this information, the 3D printer can build up the 3D layer by layer. This printhead heats the respective plastic on a viscous operating temperature between 180-250 C the so-called extruder, and applied to the print platform by means of a nozzle. Depending on the manufacturer, while the nozzle or the platform moves. After applying the first layer it cools rapidly, so that the 3D printer can begin applying the second coat.

The different 3D printers vary in quality. The Ultimaker 2 shows on the FDM printing procedure the best quality. This will depend on the quality of the careful modelling of the digital file, the precision of the movements, characterized the fineness of the nozzles, the settings in the 3D-Drucksoftware position of the stepper motor and the thermal properties of the material. Some 3D printers have multiple extruders so colorful objects can be realized. The FDM process allows to produce overhanging structures. To do this, the 3D builds special support materials with pre-defined break point. This 3D-gedruckten-Objekte following must be reworked a little, removing the supporting material.

The individual setting in the stability of the 3D-Objektes by the determination of the infills is characteristic for FDM printing. Infill shows the degree of filling of the 3D model. Here, the user has the possibility to decide how much material in the Interior of the 3D-Objektes be installed individually. With FDM 3D printing are cavities or Support structures possible that be can flushed out after using water soluble or waxy material. As a result of numerous technical innovations of electronics, materials, technical components and the three-dimensional control succeeded within a very short time the print quality significantly to improved.

HVAC Scenarios

This aware House is done in four future scenarios, in which the energy”illustrates how homeowners can simultaneously save energy and protect the environment. “” The four scenarios are named after light control”, moving energy” Visualizing energy “and open window”. Light control”visualises how consumers due to the combination of light control and automation can save energy, for example, by lighting certain areas at specific times. “Moving energy” explains how with the help of sensors processes efficiently and centrally controlled can be (E.g. switching off the heating in sunlight). In terms of visualizing energy”, energy consumption will be represented visually and made transparent. More information is housed here: Kevin Johnson. Open window”finally demonstrated the possibility of that is the heating automatically turns off when a window is opened. Such scenarios in the home using a Z-Wave wireless network can be centrally monitor and configure.

In this way, the home or apartment owner only consumes energy, where it is actually needed. Energy-saving scenarios can be realised, for example, with the Danfoss thermostats and the Kamstrup consumption meters. Also how they function will be demonstrated on the stands of each Alliance partner in Copenhagen. “Additional details about the 14 partners of the energy aware House” at. More information about the Bright Green Expo at. About Z-Wave: Z-Wave is the first technology that allows an affordable, reliable, and easy to use wireless control of every aspect of daily life of home, consumer electronics, HealthCare, and energy, to name only a few.

Z-Wave is an award-winning, proven and interoperable wireless mesh networking technology, the a wide range of devices in the and the communication around the House. These include lighting, appliances, HVAC, entertainment and security systems. Z-Wave enriched daily life to many advantages such as remote home monitoring, home health care and maintenance, safety and energy savings. Z-Wave certified products are currently available in over 350 products from leading consumer brands. “Z-Wave is the winner of the Wall Street Journal technology innovation awards” (wireless category) and the CNET best of CES awards “(enabling technologies category).

New Invisible Wall

The German speaker manufacturer Ceratec presents the new invisible Cerasonar built-in speakers with their own high performance exciter. Manufacturer Ceratec fascinated consumer electronics for years with finished products, which were always held in high-quality polished stainless steel, aluminium and glass. The latest development, the Cerasonar speaker panels are best HiFi without speakers now however completely invisible, but”! The decision to begin to optimize current developments on the market with the development of the Cerasonar exciters, the motor, fell towards the middle of 2007. Meanwhile, now also the sons of the founder of Ulrich vine and his wife are active in company Ceratec. As is known, Ulrich Ranke founded Eton and patented the HexCone honeycomb membrane technology. The construction of the Cerasonar of Heisenberg panels seems exceptionally, even though it is a technique, which is known since the thirties of the last century. In contrast to conventional speakers, the area moves the Cerasonar flat panels do not like a piston (only 0.3 mm stroke), but vibrates microscopically spread over the entire surface (DML system).

Imagine, the Panel stocks from thousands of tiny speaker chassis, which are all working to play every note on the Panel surface evenly. Since no movement before and returns, can use both sides of the speaker; the sound produced by back and front adds up. Cerasonar radiating panels sound across the front and back (dipole), where the rear sound emission can be suppressed by a cover. By the vibrating sound is scattered in all directions. The scattering takes place on the surface and allows full frequency response with extremely wide radiation. Shine compared to cone speakers Cerasonar flat panels the entire frequency range vertically and horizontally with an angle of about 160 almost evenly down. At first glance appears to this effect be the biggest advantage of.

Sound scattering the sound waves that are reflected by nearby walls, the ceiling or the floor, add panels to the direct sound of the Cerasonar. The wide radiating sound waves interact with the room size and strengthen the sound event. The entire audio/video market changed as never before. Comprehensive, conceptual solutions are in demand. Interior designers work closely with project integrators, who completely invisible professional installation and so the dream speaker and matching Electronics make a reality. Cerasonar is easy to install and offers an overwhelming sound. Ceratec has incorporated as audio specialist all the acoustic experience in the product, that women’s hearts beat faster: A house full of music but no (visible) speaker. The 6060 X 2 panel is fitted flush into the wall. The material is a special hard foam which (mode control correction) expressed by appropriate coating and MCC in contrast to competing products Not Acceptable!

Not Acceptable!